JezK
Edit File: foo2hp2600-wrapper
#!/bin/sh #* Copyright (C) 2005-2006 Rick Richardson #* #* This program is free software; you can redistribute it and/or modify #* it under the terms of the GNU General Public License as published by #* the Free Software Foundation; either version 2 of the License, or #* (at your option) any later version. #* #* This program is distributed in the hope that it will be useful, #* but WITHOUT ANY WARRANTY; without even the implied warranty of #* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #* GNU General Public License for more details. #* #* You should have received a copy of the GNU General Public License #* along with this program; if not, write to the Free Software #* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. #* #* Authors: Rick Richardson <rick.richardson@comcast.net> VERSION='$Id: foo2hp2600-wrapper.in,v 1.77 2011/01/20 00:59:57 rick Exp $' # # Printer Notes: # # HP Color LaserJet 1600: -z0 # HP Color LaserJet 2600n: -z0 # HP Color LaserJet CP1215: -z1 # PROGNAME="$0" BASENAME=`basename $PROGNAME` PREFIX=/usr SHARE=$PREFIX/share/foo2hp PATH=$PATH:/sw/bin:/opt/local/bin # # Log the command line, for debugging and problem reports # if [ -x /usr/bin/logger -o -x /bin/logger ]; then logger -t "$BASENAME" -p lpr.info -- "$BASENAME $@" </dev/null fi usage() { cat <<EOF Usage: $BASENAME [options] [ps-file] Foomatic printer wrapper for the foo2hp2600 printer driver. This script reads a Postscript ps-file or standard input and converts it to Zenographics ZjStream printer format. Normal Options: -b bits Bits per plane (1 or 2) [$BPP] -c Print in color (else monochrome) -d duplex Duplex code to send to printer [$DUPLEX] 1=off, 2=longedge, 3=shortedge -m media Media code to send to printer [$MEDIA] 1=standard, 2=transparency, 3=glossy, 257=envelope, 259=letterhead, 261=thickstock, 262=postcard, 263=labels -p paper Paper code [$PAPER] 1=letter, 5=legal, 7=executive, 9=A4, 11=A5, 13=B5 20=env#10, 27=envDL 28=envC5 34=envB5 37=envMonarch -n copies Number of copies [$COPIES] -r <xres>x<yres> Set device resolution in pixels/inch [$RES] -s source Source code to send to printer [$SOURCE] 1=tray2, 2=tray3, 4=manual/tray1, 7=auto Code numbers may vary with printer model. -t Draft mode. Every other pixel is white. -2/-3/-4/-6/-8/-10/-12/-14/-15/-16/-18 Print with N-up (requires psutils) -o orient For N-up: -op is portrait, -ol is landscape, -os is seascape. Printer Tweaking Options: -u <xoff>x<yoff> Set offset of upper left printable in pixels [varies] -l <xoff>x<yoff> Set offset of lower right printable in pixels [varies] -L mask Send logical clipping values from -u/-l in ZjStream [3] 0=no, 1=Y, 2=X, 3=XY -P Do not output START_PLANE codes. May be needed by some monochrome-only printers. -X padlen Add extra zero padding to the end of BID segments [16] -z model Model: 0=HP CLJ 1600/2600n; 1=HP CLJ CP1215 [$MODEL] -O parm=val Alignment of CMYK. "parm" is c,m,y, or k. "val" is in rows. Color Tweaking Options: -g gsopts Additional options to pass to Ghostscript, such as -dDITHERPPI=nnn, etc. May appear more than once. [] -G profile.icm Convert profile.icm to a Postscript CRD using icc2ps and adjust colors using the setcolorrendering PS operator. $SHARE/icm/ will be searched for profile.icm. -I intent Select profile intent from ICM file [$INTENT] 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute -G gamma-file.ps Prepend gamma-file to the Postscript input to perform color correction using the setcolortransfer PS operator. Debugging Options: -S plane Output just a single color plane from a color print [all] 1=Cyan, 2=Magenta, 3=Yellow, 4=Black -D lvl Set Debug level [$DEBUG] -V $VERSION EOF exit 1 } # # Report an error and exit # error() { echo "$BASENAME: $1" >&2 exit 1 } dbgcmd() { if [ $DEBUG -ge 1 ]; then echo "$@" >&2 fi "$@" } # # Portable version of 'which' # pathfind() { if [ "$1" = -p ]; then optp=1 shift else optp=0 fi OLDIFS="$IFS" IFS=: for p in $PATH; do if [ -x "$p/$*" ]; then if [ $optp = 1 ]; then echo "$p/$*" fi IFS="$OLDIFS" return 0 fi done IFS="$OLDIFS" return 1 } # # Returns true if $1 is 32-bit binary # is32() { if pathfind file; then path=`pathfind -p "$*"` is32=`file -L "$path" | grep 32-bit` if [ "$is32" = "" ]; then return 1 else return 0 fi else return 1 fi } # # N-up-ify the job. Requires psnup from psutils package # nup() { case "$NUP" in [2368]|1[0458]) tr '\r' '\n' | psnup $NUP_ORIENT -d2 -$NUP -m.3in -p$paper -q ;; [49]|1[26]) tr '\r' '\n' | psnup $NUP_ORIENT -d2 -$NUP -m.5in -p$paper -q ;; *) error "Illegal call to nup()." ;; esac } # # Process the options # # Try to use a local copy of GhostScript 8.54, if available. Otherwise, # fallback to whatever the Linux distro has installed (usually 7.07) # # N.B. := operator used here, when :- would be better, because "ash" # doesn't have :- if eval gs.foo -v >/dev/null 2>&1; then GSBIN=${GSBIN:-gs.foo} else GSBIN=${GSBIN:-gs} fi CMDLINE="$*" DEBUG=0 DUPLEX=1 BPP=1 COLOR= COLORMODE=default MODEL=0 QUALITY=1 QUALITY=wts MEDIA=1 COPIES=1 test -r /etc/papersize && PAPER=$(cat /etc/papersize) test "$PAPER" || PAPER=1 RES=600x600 SOURCE=7 NUP= CLIP_UL= CLIP_LR= CLIP_LOG= BC= AIB= NOPLANES= COLOR2MONO= GAMMAFILE=default INTENT=0 GSOPTS= EXTRAPAD= SAVETONER= NUP_ORIENT= OFF_C=0 OFF_M=0 OFF_Y=0 OFF_K=0 GSDEV=-sDEVICE=pbmraw SEGFAULT=0 # What mode to use if the user wants us to pick the "best" mode case `$GSBIN --version` in 7*) DEFAULTCOLORMODE=10 ;; 8.1*) # Buggy 8.14/8.15 in Ubuntu DEFAULTCOLORMODE=10 if is32 $GSBIN; then GAMMAFILE=km2430_2.icm else GAMMAFILE=hpclj2600n-0.icm SEGFAULT=1 fi QUALITY=1 ;; *) DEFAULTCOLORMODE=10 ;; esac while getopts "1:23456789o:b:cC:d:g:l:u:L:m:n:p:q:r:s:tz:ABS:D:G:I:PO:X:Vh?-" opt do case $opt in b) BPP="$OPTARG";; c) COLOR=-c;; d) DUPLEX="$OPTARG";; g) GSOPTS="$GSOPTS $OPTARG";; m) MEDIA="$OPTARG";; n) COPIES="$OPTARG";; p) PAPER="$OPTARG";; q) QUALITY="$OPTARG";; r) RES="$OPTARG";; s) SOURCE="$OPTARG";; t) SAVETONER="-t";; z) MODEL="$OPTARG";; l) CLIP_LR="-l $OPTARG";; u) CLIP_UL="-u $OPTARG";; L) CLIP_LOG="-L $OPTARG";; A) AIB=-A;; B) BC=-B;; C) COLORMODE="$OPTARG";; S) COLOR2MONO="-S$OPTARG";; D) DEBUG="$OPTARG";; G) GAMMAFILE="$OPTARG";; I) INTENT="$OPTARG";; O) case "$OPTARG" in c=*|C=*) OFF_C=`echo "$OPTARG" | sed "s/^..//"`;; m=*|M=*) OFF_M=`echo "$OPTARG" | sed "s/^..//"`;; y=*|Y=*) OFF_Y=`echo "$OPTARG" | sed "s/^..//"`;; k=*|K=*) OFF_K=`echo "$OPTARG" | sed "s/^..//"`;; *) error "Not [cmyk]=NUM!";; esac ;; P) NOPLANES=-P;; X) EXTRAPAD="-X $OPTARG";; [234689]) NUP="$opt";; [57]) error "Can't find acceptable layout for $opt-up";; 1) case "$OPTARG" in [024568]) NUP="1$OPTARG";; *) error "Can't find acceptable layout for 1$OPTARG-up";; esac ;; o) case "$OPTARG" in l*) NUP_ORIENT=-l;; s*) NUP_ORIENT=-r;; p*|*) NUP_ORIENT=;; esac;; -) echo aaa echo "$OPTARG"; ;; V) echo "$VERSION"; foo2hp -V; foo2zjs-pstops -V; exit 0;; h|\?) if [ "$CMDLINE" != "-?" -a "$CMDLINE" != -h ]; then echo "Illegal command:" echo " $0 $CMDLINE" echo fi usage;; esac done shift `expr $OPTIND - 1` # # If there is an argument left, take it as the file to print. # Else, the input comes from stdin. # if [ $# -ge 1 ]; then if [ "$LPJOB" = "" ]; then : # LPJOB="$1" fi exec < $1 fi # # Select the ghostscript device to use # case "$BPP" in 1) if [ "" = "$COLOR" ]; then GSDEV=-sDEVICE=pbmraw else GSDEV=-sDEVICE=bitcmyk fi case "$GAMMAFILE" in default) case "$MODEL" in 0) if [ $SEGFAULT = 0 ]; then GAMMAFILE=hpclj2600n-1.icm else GAMMAFILE=hpclj2600n-0.icm fi ;; 1) GAMMAFILE=hp1215-argyll-0.icm ;; esac ;; none) GAMMAFILE=;; esac ;; 2) if [ "" = "$COLOR" ]; then # GSDEV=-sDEVICE=pgmraw # error "2-bpp monochrome is not yet supported" GSDEV="-sDEVICE=cups -dcupsColorSpace=3 -dcupsBitsPerColor=2" GSDEV="$GSDEV -dcupsColorOrder=2" else GSDEV="-sDEVICE=cups -dcupsColorSpace=6 -dcupsBitsPerColor=2" GSDEV="$GSDEV -dcupsColorOrder=2" fi if [ $GSBIN = "gs.foo" ]; then GSBIN=gs fi case "$GAMMAFILE" in default) case "$MODEL" in 0) if is32 $GSBIN; then GAMMAFILE=km2430_2.icm GAMMAFILE=hpclj2600n-1.icm else GAMMAFILE= fi ;; 1) GAMMAFILE=hp1215-argyll-0.icm ;; esac ;; none) GAMMAFILE=;; esac ;; *) error "Illegal number of bits per plane ($BPP)";; esac # # Validate model code # case "$MODEL" in 0|1) ;; *) error "Unknown model code $MODEL";; esac # case "$QUALITY" in 0) GSOPTS="-dCOLORSCREEN $GSOPTS" ;; 1) GSOPTS="-dCOLORSCREEN $GSOPTS" ;; 2) GSOPTS="-dMaxBitmap=500000000 $GSOPTS" ;; as) GSOPTS="-dCOLORSCREEN -dMaxBitmap=500000000 $GSOPTS" ;; wts) GSOPTS="-dCOLORSCREEN -dMaxBitmap=500000000 $GSOPTS" ;; esac # # Validate media code # case "$MEDIA" in 1|plain) MEDIA=1;; 514|preprinted) MEDIA=514;; 513|letterhead) MEDIA=513;; 2|transparency) MEDIA=2;; 515|prepunched) MEDIA=515;; 265|labels) MEDIA=265;; 260|bond) MEDIA=260;; 516|recycled) MEDIA=516;; 512|color) MEDIA=512;; 276|tough) MEDIA=276;; 267|envelope) MEDIA=267;; 258|light) MEDIA=258;; 262|heavy) MEDIA=262;; 261|cardstock) MEDIA=261;; 268|lightglossy) MEDIA=268;; 269|glossy) MEDIA=269;; 270|heavyglossy) MEDIA=270;; 277|cover) MEDIA=277;; 278|photo) MEDIA=278;; [0-9]*) ;; *) error "Unknown media code $MEDIA";; esac # # Validate source (InputSlot) code # case "$SOURCE" in 1|tray2) SOURCE=1;; 4|tray1) SOURCE=4;; 7|auto) SOURCE=7;; [0-9]*) ;; *) error "Unknown source code $SOURCE";; esac # # Validate Duplex code # case "$DUPLEX" in 1|off|none) DUPLEX=1;; 2|long*) DUPLEX=2;; 3|short*) DUPLEX=3;; [0-9]*) ;; *) error "Unknown duplex code $DUPLEX";; esac # # Validate Resolution # case "$RES" in 600x600) ;; 1200x600) ;; 2400x600) ;; *) error "Illegal resolution $RES";; esac # # Figure out the paper dimensions in pixels/inch, and set the # default clipping region. Unfortunately, this is a trouble # area for ZjStream printers. Various versions of ZjS print # engines react differently when asked to print into their # unprintable regions. # set_clipping() { ulx=$1; uly=$2 lrx=$3; lry=$4 # Set clipping region if it isn't already set if [ "$CLIP_UL" = "" ]; then case "$RES" in 600x600) ulx=`expr $ulx / 2`;; 2400x600) ulx=`expr $ulx \* 2`;; esac CLIP_UL="-u ${ulx}x${uly}" fi if [ "$CLIP_LR" = "" ]; then case "$RES" in 600x600) lrx=`expr $lrx / 2`;; 2400x600) lrx=`expr $lrx \* 2`;; esac CLIP_LR="-l ${lrx}x${lry}" fi } case "$PAPER" in Custom*x*) # Command line only XDIM=`echo "$PAPER" | sed -e "s/Custom.//" -e "s/x.*//" ` YDIM=`echo "$PAPER" | sed -e "s/.*x//" ` if [ "$XDIM" = "" -o "$YDIM" = "" ]; then error "Custom page size '$PAPER' != 1-99999" fi if [ "$XDIM" -eq 0 -o "$YDIM" -eq 0 ]; then error "Custom page size '$PAPER' != 1-99999" fi XDIM=`dc -e "$XDIM 1200* 72/p"` YDIM=`dc -e "$YDIM 600* 72/p"` PAPER=1; paper=letter; set_clipping 2 80 2 80 ;; Custom*) #%%BeginFeature: *CustomPageSize True #216 #360 #0 #0 #0 #pop pop pop pop pop #%%BeginFeature: *CustomPageSize True #792.000000 612.000000 1 0.000000 0.000000 #pop pop pop pop pop if [ $DEBUG = 0 ]; then TMPFILE=/tmp/cus$$ else TMPFILE=/tmp/custom.ps fi cat >$TMPFILE exec <$TMPFILE tmp=`head -n 10000 $TMPFILE \ | sed -n '/CustomPageSize/{n;p;n;p;}' \ | tr '\n' ' '` case "$tmp" in [0-9]*\ [0-9]*) XDIM=`echo "$tmp" | sed 's/ .*//'` YDIM=`echo "$tmp" | sed -e 's/^[^ ]* //' -e 's/ .*//'` ;; *) if [ $DEBUG = 0 ]; then rm -f $TMPFILE; fi error "Custom page size [XY]DIM != 1-99999" ;; esac XDIM=`dc -e "$XDIM 1200* 72/p"` YDIM=`dc -e "$YDIM 600* 72/p"` PAPER=1; paper=letter; set_clipping 2 80 2 80 ;; 1|letter) PAPER=1; paper=letter; XDIM="10200"; YDIM="6600" set_clipping 172 80 172 80 ;; 5|legal) PAPER=5; paper=legal; XDIM="10200"; YDIM="8400" set_clipping 172 80 172 80 ;; 7|executive) PAPER=7; paper=executive; XDIM="8700"; YDIM="6300" set_clipping 174 78 174 78 ;; 9|a4|A4) PAPER=9; paper=a4; XDIM="9920"; YDIM="7016" set_clipping 176 84 176 84 ;; 11|a5|A5) PAPER=11; paper=a5; XDIM="6992"; YDIM="4960" set_clipping 176 80 176 80 ;; 13|b5|B5|b5jis) PAPER=13; paper=b5; XDIM="8598"; YDIM="6070" set_clipping 172 83 171 83 ;; 20|"env#10") PAPER=20; paper=env10; XDIM="4950"; YDIM="5700" set_clipping 171 78 171 78 ;; 27|envDL) PAPER=27; paper=envDL; XDIM="5200"; YDIM="5200" set_clipping 176 84 176 84 ;; 28|envC5) PAPER=28; paper=envC5; XDIM="7650"; YDIM="5408" set_clipping 170 80 169 80 ;; 34|envB5) PAPER=34; paper=envB5; XDIM="8316"; YDIM="5892" set_clipping 174 74 174 74 ;; 37|envMonarch) PAPER=37; paper=envMonarch;XDIM="4650"; YDIM="4500" set_clipping 174 78 173 78 ;; *) error "Unimplemented paper code $PAPER";; esac # e.g. /usr/share/ghostscript/7.07/lib/gs_statd.ps PAPERSIZE="-sPAPERSIZE=$paper"; case "$RES" in 600x600) XDIM=`expr $XDIM / 2`;; 1200x600) ;; 2400x600) XDIM=`expr $XDIM \* 2`;; esac DIM="${XDIM}x${YDIM}" # # Filter thru psnup if N-up printing has been requested # case $NUP in [234689]|1[024568]) PREFILTER="nup";; *) PREFILTER=cat;; esac if [ "$DEBUG" -ge 9 ]; then PREFILTER="tee /tmp/$BASENAME.ps" fi # # Overload -G. If the file name ends with ".icm" or ".ICM" # then convert the ICC color profile to a Postscript CRD, # then prepend it to the users job. Select the intent # using the -I option. # create_crd() { # # Create a Postscript CRD # ICC2PS=$PREFIX/bin/foo2zjs-icc2ps if [ -x $ICC2PS ]; then case "$GAMMAFILE" in none.icm | */none.icm) ;; *) if [ -x /usr/bin/logger ]; then logger -t "$BASENAME" -p lpr.info -- \ "`basename $ICC2PS` -o $GAMMAFILE -t$INTENT > $ICCTMP.crd.ps" fi $ICC2PS -o $GAMMAFILE -t$INTENT > $ICCTMP.crd.ps 2>$ICCTMP.log \ || error "Problem converting .ICM file to Postscript" ;; esac PSTOPS_OPTS="$PSTOPS_OPTS -c" cat > $ICCTMP.usecie.ps <<-EOF %!PS-Adobe-3.0 <</UseCIEColor true>>setpagedevice EOF if [ "$QUALITY" = wts -o "$QUALITY" = as ]; then if [ "$QUALITY" = wts ]; then cat >> $ICCTMP.usecie.ps <<-EOF << /UseWTS true >> setuserparams EOF else cat >> $ICCTMP.usecie.ps <<-EOF << /UseWTS false >> setuserparams EOF fi cat >> $ICCTMP.usecie.ps <<-EOF << /AccurateScreens true /HalftoneType 1 /HalftoneName (Round Dot Screen) cvn /SpotFunction { 180 mul cos exch 180 mul cos add 2 div} /Frequency 137 /Angle 37 >> sethalftone EOF fi cat > $ICCTMP.selcrd.ps <<-EOF /Current /ColorRendering findresource setcolorrendering EOF case "$GAMMAFILE" in none.icm | */none.icm) GAMMAFILE="$ICCTMP.usecie.ps";; *) GAMMAFILE="$ICCTMP.usecie.ps $ICCTMP.crd.ps $ICCTMP.selcrd.ps";; esac else GAMMAFILE= fi } if [ $DEBUG -gt 0 ]; then ICCTMP=/tmp/icc else ICCTMP=/tmp/icc$$ fi if [ "" = "$COLOR" ]; then COLORMODE= GAMMAFILE= else case "$COLORMODE" in default) COLORMODE=$DEFAULTCOLORMODE;; esac fi CRDBASE="$PREFIX/share/foo2zjs/crd" PSFILES="$PREFIX/share/foo2hp/psfiles" case "$RES" in 600x600) SCREEN=screen1200.ps;; 1200x600) SCREEN=screen1200.ps;; 2400x600) SCREEN=screen2400.ps;; esac PSTOPS_OPTS="-n" case "$COLORMODE" in 0|"") # Monochrome ;; 10|icm) # Use old ICM method AIB=-A BC=-B case "$GAMMAFILE" in none.icm | */none.icm) create_crd ;; *.icm|*.ICM|*.icc|*.ICC) # # Its really an .ICM file, not a gamma file. # # The file can be a full path name, or the name of a file in $SHARE/icm/ # if [ -r "$GAMMAFILE" ]; then create_crd elif [ -r "$SHARE/icm/$GAMMAFILE" ]; then GAMMAFILE="$SHARE/icm/$GAMMAFILE" create_crd else GAMMAFILE= fi ;; esac ;; *.crd) GAMMAFILE="$CRDBASE/prolog.ps" if [ -f $COLORMODE ]; then GAMMAFILE="$GAMMAFILE $COLORMODE" elif [ -f $CRDBASE/$COLORMODE ]; then GAMMAFILE="$GAMMAFILE $CRDBASE/$COLORMODE" else error "Can't find CRD '$COLORMODE' in . or in $CRDBASE" fi GAMMAFILE="$GAMMAFILE $CRDBASE/$SCREEN" ;; *) error "Unknown color method '$COLORMODE'" ;; esac if [ "$COLOR" != "" -a "$QUALITY" = wts ]; then PSTOPS_OPTS="$PSTOPS_OPTS -w" elif [ "$COLOR" != "" -a "$QUALITY" = as ]; then PSTOPS_OPTS="$PSTOPS_OPTS -a" fi if [ "" != "$COLOR" ]; then if [ "" = "$AIB" -a "" = "$BC" ]; then # Faster, but can't handle AllIsBlack or BlackClears : #GSDEV=-sDEVICE=pksmraw else # Can't handle different size pages : #GSDEV=-sDEVICE=bitcmyk fi fi # # Figure out USERNAME # if [ "$LPUSER" != "" ]; then USER="$LPUSER@$LPHOST" else USER="" fi # # Main Program, just cobble together the pipeline and run it # # The malarky with file descriptors 1 and 3 is to avoid a bug in # (some versions?) of Ghostscript where Postscript's stdout gets # intermingled with the printer drivers output, resulting in # corrupted image data. # # CUPS also does grief by adding its own PS code to the input file. # We take care of that with the sed command. Thus, Well Tempered # Screening now works! # GS="$GSBIN -q -dBATCH -dSAFER -dQUIET -dNOPAUSE -dNOINTERPOLATE" foo2zjs-pstops $PSTOPS_OPTS | \ $PREFILTER \ | ($GS $PAPERSIZE -g$DIM -r$RES $GSDEV $GSOPTS \ -sOutputFile="|cat 1>&3" $GAMMAFILE -_ >/dev/null 2>&1) 3>&1 \ | foo2hp -r$RES -g$DIM -p$PAPER -m$MEDIA -n$COPIES -d$DUPLEX -s$SOURCE \ $COLOR -b$BPP $CLIP_UL $CLIP_LR $CLIP_LOG $SAVETONER \ -O$OFF_C,$OFF_M,$OFF_Y,$OFF_K -J "$LPJOB" -U "$USER" \ $BC $AIB $COLOR2MONO $NOPLANES $EXTRAPAD -D$DEBUG # # Log the command line, for debugging and problem reports # if [ -x /usr/bin/logger ]; then logger -t "$BASENAME" -p lpr.info -- \ "$GSBIN $PAPERSIZE -g$DIM -r$RES $GSDEV $GSOPTS $GAMMAFILE" logger -t "$BASENAME" -p lpr.info -- \ "foo2hp -r$RES -g$DIM -p$PAPER -m$MEDIA \ -n$COPIES -d$DUPLEX -s$SOURCE $COLOR -b$BPP $CLIP_UL $CLIP_LR $CLIP_LOG \ $SAVETONER -O$OFF_C,$OFF_M,$OFF_Y,$OFF_K $BC $AIB $COLOR2MONO $NOPLANES $EXTRAPAD" fi # # Remove cruft # if [ $DEBUG -eq 0 ]; then for i in crd.ps log usecie.ps selcrd.ps do file="$ICCTMP.$i" [ -f $file ] && rm -f $file done [ -f "$TMPFILE" ] && rm -f $TMPFILE fi exit 0