JezK

Name: test
Start: 2022-11-25
End: 2022-11-25

Edit File: zlib.rbs

# 
# This module provides access to the [zlib library](http://zlib.net). Zlib is
# designed to be a portable, free, general-purpose, legally unencumbered -- that
# is, not covered by any patents -- lossless data-compression library for use on
# virtually any computer hardware and operating system.
#
# The zlib compression library provides in-memory compression and decompression
# functions, including integrity checks of the uncompressed data.
#
# The zlib compressed data format is described in RFC 1950, which is a wrapper
# around a deflate stream which is described in RFC 1951.
#
# The library also supports reading and writing files in gzip (.gz) format with
# an interface similar to that of IO. The gzip format is described in RFC 1952
# which is also a wrapper around a deflate stream.
#
# The zlib format was designed to be compact and fast for use in memory and on
# communications channels. The gzip format was designed for single-file
# compression on file systems, has a larger header than zlib to maintain
# directory information, and uses a different, slower check method than zlib.
#
# See your system's zlib.h for further information about zlib
#
# ## Sample usage
#
# Using the wrapper to compress strings with default parameters is quite simple:
#
#     require "zlib"
#
#     data_to_compress = File.read("don_quixote.txt")
#
#     puts "Input size: #{data_to_compress.size}"
#     #=> Input size: 2347740
#
#     data_compressed = Zlib::Deflate.deflate(data_to_compress)
#
#     puts "Compressed size: #{data_compressed.size}"
#     #=> Compressed size: 887238
#
#     uncompressed_data = Zlib::Inflate.inflate(data_compressed)
#
#     puts "Uncompressed data is: #{uncompressed_data}"
#     #=> Uncompressed data is: The Project Gutenberg EBook of Don Quixote...
#
# ## Class tree
#
# *   Zlib::Deflate
# *   Zlib::Inflate
# *   Zlib::ZStream
# *   Zlib::Error
#     *   Zlib::StreamEnd
#     *   Zlib::NeedDict
#     *   Zlib::DataError
#     *   Zlib::StreamError
#     *   Zlib::MemError
#     *   Zlib::BufError
#     *   Zlib::VersionError
#     *   Zlib::InProgressError
#
#
#
# (if you have GZIP_SUPPORT)
# *   Zlib::GzipReader
# *   Zlib::GzipWriter
# *   Zlib::GzipFile
# *   Zlib::GzipFile::Error
#     *   Zlib::GzipFile::LengthError
#     *   Zlib::GzipFile::CRCError
#     *   Zlib::GzipFile::NoFooter
#
module Zlib
  # 
  # Calculates Adler-32 checksum for `string`, and returns updated value of
  # `adler`. If `string` is omitted, it returns the Adler-32 initial value. If
  # `adler` is omitted, it assumes that the initial value is given to `adler`. If
  # `string` is an IO instance, reads from the IO until the IO returns nil and
  # returns Adler-32 of all read data.
  #
  # Example usage:
  #
  #     require "zlib"
  #
  #     data = "foo"
  #     puts "Adler32 checksum: #{Zlib.adler32(data).to_s(16)}"
  #     #=> Adler32 checksum: 2820145
  #
  def self.adler32: () -> Integer
                  | (String) -> Integer
                  | (String, Integer) -> Integer

# 
  # Combine two Adler-32 check values in to one.  `alder1` is the first Adler-32
  # value, `adler2` is the second Adler-32 value.  `len2` is the length of the
  # string used to generate `adler2`.
  #
  def self.adler32_combine: (Integer, Integer, Integer) -> Integer

# 
  # Calculates CRC checksum for `string`, and returns updated value of `crc`. If
  # `string` is omitted, it returns the CRC initial value. If `crc` is omitted, it
  # assumes that the initial value is given to `crc`. If `string` is an IO
  # instance, reads from the IO until the IO returns nil and returns CRC checksum
  # of all read data.
  #
  # FIXME: expression.
  #
  def self.crc32: () -> Integer
                | (String) -> Integer
                | (String, Integer) -> Integer

# 
  # Combine two CRC-32 check values in to one.  `crc1` is the first CRC-32 value,
  # `crc2` is the second CRC-32 value.  `len2` is the length of the string used to
  # generate `crc2`.
  #
  def self.crc32_combine: (Integer, Integer, Integer) -> Integer

# 
  # Returns the table for calculating CRC checksum as an array.
  #
  def self.crc_table: () -> Array[Integer]

# 
  # Compresses the given `string`. Valid values of level are Zlib::NO_COMPRESSION,
  # Zlib::BEST_SPEED, Zlib::BEST_COMPRESSION, Zlib::DEFAULT_COMPRESSION, or an
  # integer from 0 to 9.
  #
  # This method is almost equivalent to the following code:
  #
  #     def deflate(string, level)
  #       z = Zlib::Deflate.new(level)
  #       dst = z.deflate(string, Zlib::FINISH)
  #       z.close
  #       dst
  #     end
  #
  # See also Zlib.inflate
  #
  def self.deflate: (String) -> String
                  | (String, Integer) -> String

# 
  # Decode the given gzipped `string`.
  #
  # This method is almost equivalent to the following code:
  #
  #     def gunzip(string)
  #       sio = StringIO.new(string)
  #       gz = Zlib::GzipReader.new(sio, encoding: Encoding::ASCII_8BIT)
  #       gz.read
  #     ensure
  #       gz&.close
  #     end
  #
  # See also Zlib.gzip
  #
  def self.gunzip: (String) -> String

# 
  # Gzip the given `string`. Valid values of level are Zlib::NO_COMPRESSION,
  # Zlib::BEST_SPEED, Zlib::BEST_COMPRESSION, Zlib::DEFAULT_COMPRESSION (default),
  # or an integer from 0 to 9.
  #
  # This method is almost equivalent to the following code:
  #
  #     def gzip(string, level: nil, strategy: nil)
  #       sio = StringIO.new
  #       sio.binmode
  #       gz = Zlib::GzipWriter.new(sio, level, strategy)
  #       gz.write(string)
  #       gz.close
  #       sio.string
  #     end
  #
  # See also Zlib.gunzip
  #
  def self.gzip: (String) -> String
               | (String, level: Integer) -> String
               | (String, strategy: Integer) -> String
               | (String, level: Integer, strategy: Integer) -> String

# 
  # Decompresses `string`. Raises a Zlib::NeedDict exception if a preset
  # dictionary is needed for decompression.
  #
  # This method is almost equivalent to the following code:
  #
  #     def inflate(string)
  #       zstream = Zlib::Inflate.new
  #       buf = zstream.inflate(string)
  #       zstream.finish
  #       zstream.close
  #       buf
  #     end
  #
  # See also Zlib.deflate
  #
  def self.inflate: (String) -> String

# 
  # Returns the string which represents the version of zlib library.
  #
  def self.zlib_version: () -> String
end

# 
# Represents text data as guessed by deflate.
#
# NOTE: The underlying constant Z_ASCII was deprecated in favor of Z_TEXT in
# zlib 1.2.2.  New applications should not use this constant.
#
# See Zlib::Deflate#data_type.
#
Zlib::ASCII: Integer

# 
# Slowest compression level, but with the best space savings.
#
Zlib::BEST_COMPRESSION: Integer

# 
# Fastest compression level, but with the lowest space savings.
#
Zlib::BEST_SPEED: Integer

# 
# Represents binary data as guessed by deflate.
#
# See Zlib::Deflate#data_type.
#
Zlib::BINARY: Integer

# 
# Default compression level which is a good trade-off between space and time
#
Zlib::DEFAULT_COMPRESSION: Integer

# 
# Default deflate strategy which is used for normal data.
#
Zlib::DEFAULT_STRATEGY: Integer

# 
# The default memory level for allocating zlib deflate compression state.
#
Zlib::DEF_MEM_LEVEL: Integer

# 
# Deflate strategy for data produced by a filter (or predictor). The effect of
# FILTERED is to force more Huffman codes and less string matching; it is
# somewhat intermediate between DEFAULT_STRATEGY and HUFFMAN_ONLY. Filtered data
# consists mostly of small values with a somewhat random distribution.
#
Zlib::FILTERED: Integer

# 
# Processes all pending input and flushes pending output.
#
Zlib::FINISH: Integer

# 
# Deflate strategy which prevents the use of dynamic Huffman codes, allowing for
# a simpler decoder for specialized applications.
#
Zlib::FIXED: Integer

# 
# Flushes all output as with SYNC_FLUSH, and the compression state is reset so
# that decompression can restart from this point if previous compressed data has
# been damaged or if random access is desired. Like SYNC_FLUSH, using FULL_FLUSH
# too often can seriously degrade compression.
#
Zlib::FULL_FLUSH: Integer

# 
# Deflate strategy which uses Huffman codes only (no string matching).
#
Zlib::HUFFMAN_ONLY: Integer

# 
# The maximum memory level for allocating zlib deflate compression state.
#
Zlib::MAX_MEM_LEVEL: Integer

# 
# The maximum size of the zlib history buffer.  Note that zlib allows larger
# values to enable different inflate modes.  See Zlib::Inflate.new for details.
#
Zlib::MAX_WBITS: Integer

# 
# No compression, passes through data untouched.  Use this for appending
# pre-compressed data to a deflate stream.
#
Zlib::NO_COMPRESSION: Integer

# 
# NO_FLUSH is the default flush method and allows deflate to decide how much
# data to accumulate before producing output in order to maximize compression.
#
Zlib::NO_FLUSH: Integer

# 
# OS code for Amiga hosts
#
Zlib::OS_AMIGA: Integer

# 
# OS code for Atari hosts
#
Zlib::OS_ATARI: Integer

# 
# The OS code of current host
#
Zlib::OS_CODE: Integer

# 
# OS code for CP/M hosts
#
Zlib::OS_CPM: Integer

# 
# OS code for Mac OS hosts
#
Zlib::OS_MACOS: Integer

# 
# OS code for MSDOS hosts
#
Zlib::OS_MSDOS: Integer

# 
# OS code for OS2 hosts
#
Zlib::OS_OS2: Integer

# 
# OS code for QDOS hosts
#
Zlib::OS_QDOS: Integer

# 
# OS code for RISC OS hosts
#
Zlib::OS_RISCOS: Integer

# 
# OS code for TOPS-20 hosts
#
Zlib::OS_TOPS20: Integer

# 
# OS code for UNIX hosts
#
Zlib::OS_UNIX: Integer

# 
# OS code for unknown hosts
#
Zlib::OS_UNKNOWN: Integer

# 
# OS code for VM OS hosts
#
Zlib::OS_VMCMS: Integer

# 
# OS code for VMS hosts
#
Zlib::OS_VMS: Integer

# 
# OS code for Win32 hosts
#
Zlib::OS_WIN32: Integer

# 
# OS code for Z-System hosts
#
Zlib::OS_ZSYSTEM: Integer

# 
# Deflate compression strategy designed to be almost as fast as HUFFMAN_ONLY,
# but give better compression for PNG image data.
#
Zlib::RLE: Integer

# 
# The SYNC_FLUSH method flushes all pending output to the output buffer and the
# output is aligned on a byte boundary. Flushing may degrade compression so it
# should be used only when necessary, such as at a request or response boundary
# for a network stream.
#
Zlib::SYNC_FLUSH: Integer

# 
# Represents text data as guessed by deflate.
#
# See Zlib::Deflate#data_type.
#
Zlib::TEXT: Integer

# 
# Represents an unknown data type as guessed by deflate.
#
# See Zlib::Deflate#data_type.
#
Zlib::UNKNOWN: Integer

# 
# The Ruby/zlib version string.
#
Zlib::VERSION: String

# 
# The string which represents the version of zlib.h
#
Zlib::ZLIB_VERSION: String

test | Fairnetzt-Hochrhein

Home Events test

test

Dies ist ein Test

Datum

25 Nov. 2022

Vorbei!

Uhrzeit

13:00 - 18:00

JezK

Edit File: zlib.rbs

test

Datum

Uhrzeit

Teile diese Veranstaltung